| YAOHUA WIRE PRODUCTS INC.
produces quality manganese steel wire mesh screen for minery
use. We also produce wire mesh screen for mine sieving in fine
carbon steel, A3 high-carbon steel, T7A-T8A, stainless steel
1Cr18Ni19 or 2Cr18Ni9. |
| |
| Advantages of Manganese Steel Wire Mesh
Screen for Mine Use: |
| |
| Wire rod used to produce mineral screen
wire mesh must go through several important procedure: heating,
punching, tempering and so on. These working procedures guarantee
that the point of punching has no crystal fission. Otherwise
the work life of the wire mesh screen may be dramatically reduced.
Most importantly, this defects may bring problems when applied
to use. |
| |
| Manganese Steel (65Mn) offers excellent
wear-resisting, and for this propery, manganese steel is adopted
into the production of wire mesh screen for minery use. One
thing should be noted is that under the condition of low friction,
manganese steel is not wear-resisting. |
| |
| Weaving Structure of Manganese Steel Wire
Mesh Screen for Mine Use: |
| |
| We can produce a wide range of wire mesh
screen in different wire materials with varied weaving patterns.
Typical weaving patterns include long strip hole weaving, flat
strip weaving, ()shaped strip weaving, tube shaped weaving.
We can also do custom designs. |
| |
| The weaving structure of inlaying form (
) has several advantages. First, the intersect point of warp
and weft is not projeccting; secondly, the mesh hole of the
screen is accurate and fixed firmly. Compared with weaving structure
of wave form ( ) of same material and size,
the work life of the inlaying form wire mesh screen is increased
greatly, also the firmness and the precision of the hole through
work is strengthened. |
| |
|
|
Manganese Steel
(65Mn) Wire Mesh Screen |
Manganese Steel
(65Mn) Wire Mesh Screen |
|
| |
|
|
Manganese Steel
(65Mn) Wire Mesh Screen |
Manganese Steel
(65Mn) Wire Mesh Screen |
|
| |
